Inventory
Reduction
 Sale

 

ALL SALES FINAL
Payment by cashiers check or money order only.
Click on Model # to see current model webpage/picture
Call for more information on specific headers

 

Model # Description S/N Specs Sale Price
    These large diameter pipes are sold as a set as shown.
Expanded on one end.
Available in 3-1/2" and 4".
$25
*004 BMW 80-83 320i 680-986 1-1/4" primaries $75.00
*006 BMW 318i 101-005 1-1/4" primaries $75.00
*011 BMW 530i 505-132 1-3/8" primaries $150.00
*013 BMW 733i 985-854 1-3/8" primaries $150.00
*101 64-67 Chevelle 1073-657 1-3/8" primaries $150.00
*#103
F32
78-80 Chevelle 489-248 New 1-5/8" primaries right side only Partially assembled $50.00
*#103
C
78-80 Chevelle PA 1045 New 1-7/8" primaries left  side only Partially assembled $50.00
*#103
 
SB 78-87 G-Body   1-7/8 bends only  (hp) $125.00
*104 SB 93-97 Camaro   1-3/4 bends only $125.00
*105 SB 67-69 Camaro 205-052 1-5/8 primaries with 2-1/2" weld-on
 collector and 3-bolt flange,
left side only
$50.00
*105 65-66 Impala 893-366 1-3/4 stepped to 1-7/8 primaries built on 7-bolt spread port flanges $400.00
*107 SB 70-81 Camaro   1-3/4 bends only $125.00
*107 SB 70-81 Camaro   1-7/8 stepped to 2" bends only $125.00
*108 SB 82-92 Camaro
(2 sets)
  1-7/8" bends only $125.00
*110 SB 67-69 Road Race Camaro   1-3/4" bends only $125.00
*110 SB 67-69 Road Race Camaro   1-7/8" bends only $125.00
*#113
A22 SF
SB C4 Corvette 400-172 New 1-5/8 to1-3/4 with 3"
special curved split collector
Built for auto trans, no a/c,
corvette aluminum head
$500.00
*#113
1RR, 1DR
SB C4 Corvette   1-5/8 stepped to1-3/4 bends only (have both drag race
and road race designs available)
$125.00
*114 SB 56-62 Corvette   2-1/8" bends only $125.00
*116
B
SB 63-81 Corvette (under chassis design) 503-146 1-3/4" (right side only) $50.00
*118 55-57 Chevy (in chassis) 893-366 1-5/8" primaries built for stock heads (must remove mount at bell housing)
Brand New!
Built to Jere's personal 56 Chev.
but never installed.
$699.00
*121 58-64 with 348/409   1-3/4" bends only $125.00
*133 Aero Roadster
(2 sets available)
  2" bends only $125.00
*134
 
SB Econorail
 
407-106 1-7/8" primaries (brazed but needs ground at flanges)
Built on Stahl 7-bolt outer flange
adapter flanges not included
$150.00
*134 SB Econorail
(3 sets available)
  1-7/8" bends only
(3 sets available)
$125.00
*134 SB Econorail   2" bends only $125.00
*134 SB Econorail   2-1/8" bends only $125.00
*135 SB Downswept Dragster   2-1/4" bends only $125.00
*
C
4 WD pickup truck (in chassis) 1178-1317 1-3/8" primaries $75.00
*
C
4 WD pickup truck (in chassis) 180-191 1-3/8" primaries (used) $50.00
*
E
4 WD pickup truck (in chassis) 1280-2066 LS 1-1/2" primaries, left side only $40.00
*136 SB Chev Truck/Tractor
C21 SF
600-252 New 2-1/8 to 2-1/4
Built for Brodix 18 cyl heads
$300.00
*136 SB Chev Truck/Tractor   1-5/8" bends only $125.00
*136 SB Chev Truck/Tractor   1-3/4' bends only $125.00
*136 SB Chev Truck/Tractor   1-7/8" bends only $125.00
*144 SB Chev Fenderwell exit Truck   1-3/4" bends only $125.00
*201 BB 6      
*202 BB 68-72 Chevelle   2" bends only $125.00
*203 BB 78-87 G-Body   2" stepped to 2-1/8" bends only $125.00
*228 BB Pro 1.0 Strutt design   2-1/8" bends only $125.00
*229 BB Pro 1.1 A-arm design   2-1/8" Right side bends only $50.00
*230 BB Pro 1.2 A-arm design   2" bends only $125.00
*232 BB Pro 3.1 A-arm design   2-1/8" bends only $125.00
*235 BB Downswept Dragster   2-1/8 bends only $125.00
*234
D
BB Econorail Dragster

 
1104-261 2" primaries, right side only $50.00
*240
D
BB Upright Truck/Tractor
(#4 has dent)
 
501-138 2-1/8" built on flanges for
Dart 320-360
$100.00
*240 BB Upright Truck/Tractor
(4 sets available)
  2" bends only $125.00
*240 BB Upright Truck/Tractor
(2 sets available)
  2-1/8" bends only $125.00
*287
A61
BB Chev Roadster 493-137 New 1-7/8" to 2 removable $300.00
*292
F
BB Chev Rear Engine Boat 575-457 2-1/8 $100.00
*313 BB Mopar Truck/Tractor   2" bends only $125.00
*321 BB Mopar 67-76 A-Body   2" bends only $125.00
*325 Viper 995-290 1-5/8" $50.00
*325
C
Viper 995-291 1-5/8" $50.00
*325 Viper 498-157 1-5/8" (used for fit check) $50.00
*401
B
Mustang 8.2 Windsor stock PA
496-129
1-5/8" primaries with 3" removable collectors
(RS is finished,LS is tacked to flanges,
used as a fit check header)
$100.00
*425 Mustang with SB Chev engine
(2 sets)
  2" stepped to 2-1/8" bends only
(3 sets available)
$125.00
*437 SB Ford truck/Tractor (Ford Windsor & BuickChevy)
(2 sets)
  1-5/8" bends only $125.00
*437 SB Ford truck/Tractor (Ford Windsor & BuickChevy)   1-3/4" bends only $125.00

CIRCLE TRACK HEADERS

The flanges alone are worth the price we are asking for these headers. 
You can always cut them up to make a custom set.

Model # Description S/N Specs Sale Price
*073
A
1600 Ford OT-25 (right side straight out and back design) (tacked together at flange) PA 721 1-3/8" $40.00
*
F
2000 Ford Pinto dyno header 888-662   $40.00
* Buick V6 Grand National 1291-567 1-7/8 stepped to 2 stepped to 2-1/8
right side only
$30.00
* Chev V6 Late Model Cross Over 1.0 designed for stock front end
i
591-983 1-3/4 x 3" weld on $75.00
* Chev V6 Grand National
includes 3-1/4" removable collector and adj. primary pieces
889-665 1-3/4 stepped to 1-7/8 stepped to 2 stepped
right side only
$30.00
* Buick V6 Late Model Cross Over 
stepped header
191-019   $60.00
*143
B
Used dyno header
(ND FS GN design)
480-665 2" x 3-1/2" built on Stahl 7-bolt flange $50.00
*150
A
SB Late Model Cross Over
Standard Chevy flange

Design for stock front end
1179-1701 1-3/4" built on Stahl 7-bolt outer flange
(right side only)
$50.00
*150
A
SB Late Model Cross Over
Standard Chevy flange

Design for stock front end
790-571 1-3/4" taperswedged step to 2"
(right side only)
$50.00
*151
C64
SB Late Model Cross Over
Built on Stahl 7 bolt flange

Requires adapter flanges
(not included)

Design 1.1 for Mike's Balancing
179-150 1-3/4" $75.00
*151
C74
SB Late Model Cross Over
Built on Stahl 7 bolt flange

Requires adapter flanges
(not included)

Design 1.1 for Mike's Balancing
1179-1701 RS 1-3/4" right side only $40.00
*151
C63
SB Late Model Cross Over
Built on Stahl 7 bolt flange

Requires adapter flanges
(not included)

Design 1.1 for Mike's Balancing
781-1553 RS 1-3/4" right side only $40.00
*152
F43
SB Late Model Cross Over
Built on Stahl 7 bolt flange

Requires adapter flanges
(not included)

Design 1.2
679-1119 1-7/8" $75.00
*154
C54
SB Late Model Cross Over
Built on Stahl 7 bolt flange

Requires adapter flanges
(not included)

Design 1.4 for Hanley
483-587 RS right side only $40.00
*154
F42
SB Late Model Cross Over
Built on Stahl 7 bolt flange

Requires adapter flanges
(not included)

Design 1.4 for Hanley
483-588 1-3/4 x 3-1/2" $75.00
*157
B53
SB Late Model Cross Over
Built on Stahl 7 bolt flange

Requires adapter flanges
(not included)

Design 1.7 for 5th design Howe, Steve Leavit, Jim Heisken,
 Noleti, Frings, Bopp, Jig-a-lo, Speedway Engineering
296-037 1-3/4 x 3 $75.00
*158
B62
SB Late Model Cross Over
Built on Stahl 7 bolt flange

Design 1.8 for Rayburn 1984 with floor mounted brakes,
Bullitt
385-312 LS 1-7/8 left side only
Built on 7-bolt spread port flanges
$40.00
*158
D
SB Late Model Cross Over
Built on Stahl 7 bolt flange

Design 1.8 for Rayburn 1984 with floor mounted brakes,
Bullitt
187-075 LS 1-7/8 left side only
Built on 7-bolt spread port flanges
$40.00
*158
D
SB Late Model Cross Over
Built on Stahl 7 bolt flange

Design 1.8 for Rayburn 1984 with floor mounted brakes,
Bullitt
490-305 1-7/8
Built on 7-bolt spread port flanges
$75.00
*159
C52
SB Late Model Cross Over


Design 1.9 for 1985 Jig-a-lo
585-375 1 7/8 x 3-1/2
Built on 7-bolt spread port flanges
$75.00
*159
C
SB Late Model Cross Over


Design 1.9 for 1985 Jig-a-lo
187-076 1-3/4 stepped to 1 7/8 x 3-1/2 weld on
Built on 7-bolt spread port flanges
right side only
$40.00
*160
B
SB Late Model Cross Over

Design 2.0 for 7th design Howe 1984, pre 92 Randarcar, Hamke
 Moon, Howe "strutt", Bonnett, Port city ASA style
PA1045 1-3/4" (tacked to flanges, used for fit check) $40.00
*160
E32
SB Late Model Cross Over

Design 2.0 for 7th design Howe 1984, pre 92 Randarcar, Hamke
 Moon, Howe "strutt", Bonnett, Port city ASA style
785-595 RS 1-3/4 to 1-7/8 step x 3-1/2 Fix
right side only
Built on 7-bolt spread port flanges
$40.00
*161
A51 H
SB Late Model Cross Over

Design 2.1 for 1985 Bullitt
587-525 1-3/4 to 1-7/8 x 3-1/2" removable $75.00
*161
E42
SB Late Model Cross Over

Design 2.1 for 1985 Bullitt
587-532 LS 1-3/4 - 1-7/8 x 3-1/2
Built on 7-bolt spread port flanges
left side only
$40.00
*161
F31
SB Late Model Cross Over

Design 2.1 for 1985 Bullitt
891-430 1-3/4 - 1-7/8 x 3-1/2
Built on 7-bolt spread port flanges
$75.00
*162
B63
SB Late Model FenderWell

Design 2.2 for 86 Bullit, Swartz, pre87 Rayburn,
Mastterbuilt, Warrior
1287-1190 LS 1-7/8 x 3-1/2
Built on 7-bolt spread port flanges
left side only
$40.00
*162
C
SB Late Model FenderWell

Design 2.2 for 86 Bullit, Swartz, pre87 Rayburn,
Mastterbuilt, Warrior
291-071 RS 1-3/4

right side only
$40.00
*162
D
SB Late Model FenderWell

Design 2.2 for 86 Bullit, Swartz, pre87 Rayburn,
Mastterbuilt, Warrior
388-224 1-3/4

 
$75.00
*163
B34
SB Late Model Cross Over
Design 2.3 for Port City asphalt, 92 Howe, Lefthander
400-166 LS left side only $40.00
*163
B21 SF
SB Late Model Cross Over

Design 2.3 for Port City asphalt, 92 Howe, Lefthander
600-242 no collectors $100.00
*163
B33
SB Late Model Cross Over

Design 2.3 for Port City asphalt, 92 Howe, Lefthander
600-243 RS no collectors, right side only $40.00
*163
B34
SB Late Model Cross Over

Design 2.3 for Port City asphalt, 92 Howe, Lefthander
600-244 RS right side only $40.00
*163
B22
SB Late Model Cross Over

Design 2.3 for Port City asphalt, 92 Howe, Lefthander
893-359 LS left side only $40.00
*163
B23
SB Late Model Cross Over

Design 2.3 for Port City asphalt, 92 Howe, Lefthander
395-117 LS 1-3/4 1 stp rem 3" left side only $40.00
*164
D12
SB Late Model FenderWell

Design 2.4 for 89-91 Rayburn, 90 Bullit
391-127 1-3/4 $75.00
*164
D22
SB Late Model FenderWell

Design 2.4 for 89-91 Rayburn, 90 Bullit
391-128 1-3/4, built on 7-bolt SP flanges $75.00
*164
D11
SB Late Model FenderWell

Design 2.4 for 89-91 Rayburn, 90 Bullit
391-129 1-3/4, built on 7-bolt SP flanges $75.00
*164
D21
SB Late Model FenderWell

Design 2.4 for 89-91 Rayburn, 90 Bullit
391-131 1-3/4, built on 7-bolt SP flanges $75.00
*164
D21
SB Late Model FenderWell

Design 2.4 for 89-91 Rayburn, 90 Bullit
391-133 1-7/8, built on 7-bolt SP flanges $75.00
*164
D22
SB Late Model FenderWell

Design 2.4 for 89-91 Rayburn, 90 Bullit
391-138 1-7/8, built on 7-bolt SP flanges $75.00
*164
B64
SB Late Model FenderWell

Design 2.4 for 89-91 Rayburn, 90 Bullit
391-141 1-3/4 to 1-7/8, built on 7-bolt SP flanges $75.00
*164
C61
SB Late Model FenderWell

Design 2.4 for 89-91 Rayburn, 90 Bullit
491-202 1-3/4 to 1-7/8 x 3-1/2" rem, built on 7-bolt SP flanges $75.00
*164
C62
SB Late Model FenderWell

Design 2.4 for 89-91 Rayburn, 90 Bullit
491-203 1-3/4 to 1-7/8 x 3-1/2 rem, built on 7-bolt SP flanges $75.00
*165
D21
SB Late Model FenderWell

Design 2.5 for Masterbuilt
792-354 1-7/8, built on 7-bolt SP flanges $75.00
*166
D11
SB Late Model FenderWell

Design 2.6 for 90-92 Ray Allen, 92 Randarcar
792-355 1-7/8, built on 7-bolt SP flanges $75.00
*600 SB Chev Sprint/Roadster style
(appearance very similar to
#181 except mig welded)
HC 1-7/8, built on
7-bolt spread port flanges
 
$99.00
*181 SB Chev Sprint/Roadster style
(1 side is chrome, other side alum. coated used for shows)
 
1079-1524 2" x 3-1/2" weld-on collectors built on
7-bolt spread port flanges
 
$99.00
*181 SB Chev Sprint/Roadster style

 
1174-760 LS 1-3/4 primaries, left side only
 
$40.00
*605
 
SB Chev New York Modified HC 1-3/4 to 1-7/8, built
on 7-bolt flanges that
require adapters
$99.00
*187
A72
SB Nascar Modified

Design OT-1T for 1988 & older Troyer with standard foot box

Left side outside body, right side inside body
183-110  RS 1-7/8" right side only $40.00
*187
A
SB Nascar Modified

Design OT-1T for 1988 & older Troyer with standard foot box

Left side outside body, right side inside body
183-116  RS 1-7/8"x 3-1/2 weld-on collector, right side only $40.00
*187
A
SB Nascar Modified

Design OT-1T for 1988 & older Troyer with standard foot box

Left side outside body, right side inside body
183-117  RS 1-7/8"x 3-1/2 weld-on collector, right side only $40.00
*187
A71
SB Nascar Modified

Design OT-1T for 1988 & older Troyer with standard foot box

Left side outside body, right side inside body
183-120  RS 1-7/8"x 3-1/2 weld-on collector, right side only $40.00
*187
A
SB Nascar Modified

Design OT-2T for 1988 & older Troyer with standard foot box

Left side outside body, right side inside body
183-093  RS 1-7/8"x 3-1/2 removalbe collector, right side only $40.00
*187
A74
SB Nascar Modified

Design OT-1T for 1988 & older Troyer with standard foot box

Left side outside body, right side inside body
1288-835  RS 1-7/8"x 3-1/2 weld-on collector, right side only $40.00
*187
A73 SF
SB Nascar Modified
Design OT-1T for 1988 & older Troyer with standard foot box
Left side outside body, right side inside body
1288-836 1-7/8"x 3-1/2 removable collector $75.00
*187
E43
SB Nascar Modified

Design OT-1T for 1988 & older Troyer with standard foot box

Left side outside body, right side inside body
289-121 RS 1-3/4 x 3-1/2 weld-on collector
Built on standard 6-bolt flange
right side only
$40.00
*187
A43
SB Nascar Modified

Design OT-1T for 1988 & older Troyer with standard foot box

Left side outside body, right side inside body
387-312 LS 1-3/4 x 3-1/2 removable collector left side only $40.00
         
  PARTIALLY ASSEMBLED
(primaries are tack welded to the flanges. 
No collectors are included)
     
*071
A64
Ford 1600 Sprint style
Design OT-21
PA 719 1-1/2" $30.00
*155
A52
SB Late Model Cross Over
Built on standard Chev 6-bolt flanges

Design 1.5 for Dillon
PA 917 LS  1-34*32 wo  std/fx left side only $30.00
*155
A52
SB Late Model Cross Over
Built on standard Chev 6-bolt flanges

Design 1.5 for Dillon
PA 963 RS 1-34*32 wo  std/fx right side only $30.00
*157
A45
SB Late Model Cross Over
Built on Stahl 7 bolt flange

Requires adapter flanges
(not included)

Design 1.7 for 5th design Howe, Steve Leavit, Jim Heisken,
 Noleti, Frings, Bopp, Jig-a-lo, Speedway Engineering
PA-1016 1-3/4 left side only $30.00
*157
A45
SB Late Model Cross Over
Built on Stahl 7 bolt flange

Requires adapter flanges
(not included)

Design 1.7 for 5th design Howe, Steve Leavit, Jim Heisken,
 Noleti, Frings, Bopp, Jig-a-lo, Speedway Engineering
PA-2001 1-7/8right side only $30.00
*158
B52
SB Late Model Cross Over
Built on Stahl 7 bolt flange

Design 1.8 for Rayburn 1984 with floor mounted brakes,
Bullit
PA 1047 1-7/8, left side only
Built on 7-bolt SP flange
$30.00
*159
A53
SB Late Model Cross Over
Built on Stahl 7 bolt flange

Design 1.9 for 1985 Jig-a-lo
PA 1053RS 1-7/8 weld-on collector
Built on 7-bolt Stahl outer, requires adapter flange (not included)
right side only
$30.00
*163
B54
SB Late Model Cross Over

Design 2.3 for Port City asphalt,
 92 Howe, Lefthander
PA-1050 1-7/8 left side only $30.00
*157
B52
SB LMCO 2.3 RS PA 1052 1-7/8 right side only $30.00
*163
A65
SB Late Model Cross Over

Design 2.3 for Port City asphalt,
 92 Howe, Lefthander
PA-1091   $60.00
*163
B61
SB Late Model Cross Over

Design 2.3 for Port City asphalt,
 92 Howe, Lefthander
PA 1097 1-7/8 - 2  $60.00
*165
A54
SB Late Model FenderWell

Design 2.5 for Masterbuilt
PA-1056   $60.00
*166
B54
SB Late Model FenderWell

Design 2.6 for 90-92 Ray Allen, 92 Randarcar
PA 1054  RS LMFW134 2.6 adp  1-3/4*PA 3-1/2 adpt ;eft side only $30.00

Back    Home